If Your Hot Water System Fails: Quick Action Guide
If Your Hot Water System Fails: Quick Action Guide
Blog Article
In this article below you will find a lot of professional ideas relating to What Would Cause My Electric Water Heater to Stop Working?.
Several modern-day residences take advantage of an electrical hot water heater for their heater, because of its ease and also simplicity of use. Nevertheless, much like any other electric home appliances, issues may develop with its usage, suddenly. It can be really frustrating to awaken to a cool shower rather than a hot one or having your bath with water that isn't warm sufficient or perhaps as well hot. Whatever the case might be, water heater troubles can be quite aggravating. The good news is, we've made a checklist of feasible services to your water heater concerns. There are a number of factors that can trigger a lot of these issues, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it taken care of ought to not posture way too much of a problem if you follow these actions:
Inspect Your Power Supply:
As standard as this might seem, it is very essential. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power problem. Inspect if the fuse is blown out or the breaker tripped. If the breaker is the issue, just turn it off and on once more. Replace any kind of damaged or damaged fuse. Evaluate the device with power after these changes to see if it's currently functioning.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that try looking into your heating element if it is still functioning. Test each of your burner to ensure the trouble isn't with any of them. If any of them is damaged, replace that part and afterwards check whether the warm water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm enough, you may require to check the temperature setups on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the gain access to panel as well as press the red switch for temperature level reset above the thermostat. This ought to aid heat the water. Turn the breaker back on and also inspect if the issue has actually been resolved.
Call A Professional:
If after replacing all faulty components as well as resetting your temperature level, the water heater still isn't working, you may need to call a professional plumber for a professional viewpoint. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your house. Whatever the case may be, a professional plumber would help solve the problem.
Conclusion
Water heater issues are not constantly significant. Many of them are due to small concerns like a blown fuse or damaged burner. Changing the malfunctioning parts should suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads on What Would Cause My Electric Water Heater to Stop Working?, I was thinking sharing that post was a smart idea. Liked our entry? Please share it. Help another person find it. We enjoy reading our article about Hot Water Heater Repair.
Schedule Service Now Report this page